The PM400X4 is a 400 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specifications:
- Number of Channels:Â 4
Rated Power (RMS Continuous Power):
50 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
Total Power (Sum of Rated Power): 400 Watts
Dynamic Power (PVC/PowerCube®):
82 Watts x 4 @ 4-Ohm
137 Watts x 4 @ 2-Ohm
266 Watts x 2 @ 4-Ohm Bridged
Bridgeable:Â Yes
Frequency Response:Â 20Hz to 20kHz +/- 1.0dB
Efficiency (average):Â 67% @ 4-Ohm
Total Harmonic Distortion (THD+Noise):Â 4-Ohm: <1.0%Â 2-Ohm: <1.0%
Crossover Controls:
Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth
Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
Tone Controls:
Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Input Sensitivity:Â 150 mV – 12 V
Signal Input:Â Hi/Low level: 2 RCA pair
Signal Output:Â –
Power Input Connector:Â Captive C-Clamp
Power Wire Gauge:Â 8 AWG to 4 AWG
Speaker Output Connector:Â Captive C-Clamp
Speaker Wire Gauge:Â 8 AWG to 18 AWG
Heat Sink Type:Â Cast aluminum
Cooling:Â Convection
Remote Controls:Â –
Visual Indicators:
Power/Protect/Thermal LED
Input Clip LED
Output Clip LED
Circuit Topology Class:Â Class-A/B
Operating Voltage:Â 9 – 16 VDC
Recommended Fuse (not included): 60 A
Max. Current Draw (13.8V Sinewave):Â 60 A
Average Current Draw (13.8V Music):Â 30 A
Suggested Alternator:Â 75 A
Shipping Weight:Â 10.8 Lbs. (4.89 Kg.)
Dimensions (H x W x D):
2.38 x 7.76 x 11.03 (in)
6.05 x 19.71 x 28.02 (cm)